Homelite Belt Drive Saw Series

All makes and models once they become available.
User avatar
Sugarcreeksaws
Collector Forum's Finest
Posts: 512
Joined: Feb 15th, '06, 20:44
Location: Sugar Creek, MO (suburb of Kansas City, MO)

Homelite Belt Drive Saw Series

Postby Sugarcreeksaws » Jun 9th, '08, 06:31

Hi Everyone,

Here are pictures of a popular set that I now have available....the 26LCS! Soon I will also have sets for the 20MCS, 5-30, 5-30N, 7-29 and 8-29!

Decal sets can be provided in up to three different formats. Some sets will only be offered in 1-2 formats. All offerings available will be listed under the respective title.

Formats include:

Waterslide/Mixed – Many of the older saws originally had waterslide decals. To properly restore an old unit, many restorers want to stay with the same format. It is strongly suggested that application solvents such as MicroSet and MicroSol (from http://www.microscale.com) be used to apply waterslide decals. It is also strongly suggested that the restorer mist coat the decals with a clear coat after application. Use several very light coats and let them dry before a heavier protective coat is applied so that the sealer solvent does not wrinkle the decals. Any white, silver or gold features would not be able to be printed on clear waterslide media. Therefore, these features are typically provided as self adhesive decals. The mixed set is a combination of these self adhesive and waterslide decals. Once again, it is strongly suggested that the restorer mist coat the decals and saw with a clear coat after decal application to lock the decals into the finish. A heavier protective coating should then be applied to protect the saw and the decals.
Self adhesive - Some of the later saws originally had self adhesive decals. Some restorers would rather have the convenience of self adhesive over waterslide/mixed sets. As with the waterslide/mixed sets, it is strongly suggested that the restorer mist coat the decals with a clear coat after application. Use several very light coats and let them dry before a heavier coat is applied so that the sealer solvent does not wrinkle the decals. A heavier protective coating should then be applied to protect the saw and the decals.
Vinyl coated self adhesive - Some restorers do not want to clear coat their saw after applying the decals. The vinyl coating provides the maximum amount of protection to the surface of the decal. However, the vinyl coating cannot protect gas and oil from eventually creeping under the decal and lifting it. If your saw is to be displayed, this is a great option.


Homelite 26LCS
Image

SC001201 Homelite 26LCS mixed decal set
SC001200 Homelite 26LCS self adhesive decal set
SC001202 Homelite 26LCS vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Homelite 20MCS
Image

SC005701 Homelite 20MCS mixed decal set
SC005700 Homelite 20MCS self adhesive decal set
SC005702 Homelite 20MCS vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Homelite 7-29
Image

SC012500 Homelite 7-29 self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Homelite 5-30N
Image

SC013600 Homelite 5-30N self adhesive decal set
SC013602 Homelite 5-30N vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Homelite 8-29
Image

SC021700 Homelite 8-29 self adhesive decal set
SC021702 Homelite 8-29 vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.

Looking forward to seeing pics of your finished saw! More sets to come soon!

Please go to the Help Desk to download the pricing pdf and an order form. If you have any questions, please email me at scsupply@gmail.com.
Please refer to Matt's Tips and Tricks in the Help Desk for "How To Apply" these decals for a professional look.
Enjoy!
Joe

User avatar
Sugarcreeksaws
Collector Forum's Finest
Posts: 512
Joined: Feb 15th, '06, 20:44
Location: Sugar Creek, MO (suburb of Kansas City, MO)

Re: Homelite Belt Drive Saw Decals

Postby Sugarcreeksaws » Nov 17th, '09, 04:14

Good evening, everyone!
The 5-30N decal set is now available.
Joe

User avatar
Sugarcreeksaws
Collector Forum's Finest
Posts: 512
Joined: Feb 15th, '06, 20:44
Location: Sugar Creek, MO (suburb of Kansas City, MO)

Re: Homelite Belt Drive Saw Series

Postby Sugarcreeksaws » Feb 5th, '15, 19:58

Hi Everyone!
All sets in this series have had their set numbers updated!
Enjoy!
Joe


Return to “SCS Decals Now Available”



Who is online

Users browsing this forum: No registered users and 1 guest