Titan Series

All makes and models once they become available.
User avatar
Sugarcreeksaws
Collector Forum's Finest
Posts: 512
Joined: Feb 15th, '06, 20:44
Location: Sugar Creek, MO (suburb of Kansas City, MO)

Titan Series

Postby Sugarcreeksaws » Sep 29th, '09, 06:25

Hi Everyone!
Similar to the Strunk sets, these decal sets took a lot of time and patience to get good samples so as to see the complete detail. I am very confident that these are as close to original as we are going to get! Enjoy!

Decal sets can be provided in up to three different formats. Some sets will only be offered in 1-2 formats. All offerings available will be listed under the respective title.

Formats include:

Waterslide/Mixed – Many of the older saws originally had waterslide decals. To properly restore an old unit, many restorers want to stay with the same format. It is strongly suggested that application solvents such as MicroSet and MicroSol (from http://www.microscale.com) be used to apply waterslide decals. It is also strongly suggested that the restorer mist coat the decals with a clear coat after application. Use several very light coats and let them dry before a heavier protective coat is applied so that the sealer solvent does not wrinkle the decals. Any white, silver or gold features would not be able to be printed on clear waterslide media. Therefore, these features are typically provided as self adhesive decals. The mixed set is a combination of these self adhesive and waterslide decals. Once again, it is strongly suggested that the restorer mist coat the decals and saw with a clear coat after decal application to lock the decals into the finish. A heavier protective coating should then be applied to protect the saw and the decals.
Self adhesive - Some of the later saws originally had self adhesive decals. Some restorers would rather have the convenience of self adhesive over waterslide/mixed sets. As with the waterslide/mixed sets, it is strongly suggested that the restorer mist coat the decals with a clear coat after application. Use several very light coats and let them dry before a heavier coat is applied so that the sealer solvent does not wrinkle the decals. A heavier protective coating should then be applied to protect the saw and the decals.
Vinyl coated self adhesive - Some restorers do not want to clear coat their saw after applying the decals. The vinyl coating provides the maximum amount of protection to the surface of the decal. However, the vinyl coating cannot protect gas and oil from eventually creeping under the decal and lifting it. If your saw is to be displayed, this is a great option.


Titan 30
Image

SC012101 Titan 30 waterslide decal set
SC012100 Titan 30 self adhesive decal set
SC012102 Titan 30 vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Titan 35
Image

SC012201 Titan 35 waterslide decal set
SC012200 Titan 35 self adhesive decal set
SC012202 Titan 35 vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Titan 40
Image[/URL]

SC021301 Titan 40 mixed decal set
SC021300 Titan 40 self adhesive decal set
SC021302 Titan 40 vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Titan 45
Image[/URL]

SC021401 Titan 45 decal mixed decal set
SC021400 Titan 45 decal self adhesive decal set
SC021402 Titan 45 decal vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.



Titan 60
Image[/URL]

SC024701 Titan 60 decal mixed decal set
SC024700 Titan 60 decal self adhesive decal set
SC024702 Titan 60 decal vinyl coated self adhesive decal set

Please note: If you need assistance with location of these decals on your unit, just ask, we have lots of photos that can help you with location.

Please go to the Help Desk to download the pricing pdf and an order form. If you have any questions, please email me at scsupply@gmail.com.
Please refer to Matt's Tips and Tricks in the Help Desk for "How To Apply" these decals for a professional look.
Enjoy!
Joe

User avatar
Sugarcreeksaws
Collector Forum's Finest
Posts: 512
Joined: Feb 15th, '06, 20:44
Location: Sugar Creek, MO (suburb of Kansas City, MO)

Re: Titan Decal Sets

Postby Sugarcreeksaws » Feb 5th, '15, 00:37

Hi Everyone!
Titan 60 now available!
Enjoy!
Joe


Return to “SCS Decals Now Available”



Who is online

Users browsing this forum: No registered users and 1 guest